In this chapter you will learn about the MySQL Utilities that come in a given distribution. You will learn what each of them does, how to use it, and what you should use it for.
All MySQL clients that communicate with the server using the
mysqlclient library use the following environment variables:
| Name | Description |
MYSQL_UNIX_PORT | The default socket; used for connections to localhost
|
MYSQL_TCP_PORT | The default TCP/IP port |
MYSQL_PWD | The default password |
MYSQL_DEBUG | Debug-trace options when debugging |
TMPDIR | The directory where temporary tables/files are created |
Use of MYSQL_PWD is insecure.
See section 6.6 Connecting to the MySQL Server.
The `mysql' client uses the file named in the MYSQL_HISTFILE
environment variable to save the command-line history. The default value for
the history file is `$HOME/.mysql_history', where $HOME is the
value of the HOME environment variable. See section A Environment Variables.
All MySQL programs take many different options. However, every
MySQL program provides a --help option that you can use
to get a full description of the program's different options. For example, try
mysql --help.
You can override default options for all standard client programs with an option file. section 4.16.5 Option Files.
The list below briefly describes the MySQL programs:
myisamchk
myisamchk has many functions, it is described in its own
chapter. See section 16 Maintaining a MySQL Installation.
make_binary_distribution
support.mysql.com for the
convenience of other MySQL users.
msql2mysql
mSQL programs to MySQL. It doesn't
handle all cases, but it gives a good start when converting.
mysqlaccess
mysqladmin
mysqladmin can also be used to retrieve version,
process, and status information from the server.
See section 15.6 Administering a MySQL Server.
mysqlbug
mysqld
mysqldump
mysqlimport
LOAD DATA
INFILE. See section 15.9 Importing Data from Text Files.
mysqlshow
mysql_install_db
replace
msql2mysql, but that has more
general applicability as well. replace changes strings in place in
files or on the standard input. Uses a finite state machine to match longer
strings first. Can be used to swap strings. For example, this command
swaps a and b in the given files:
shell> replace a b b a -- file1 file2 ...
mysqld-max is the MySQL server (mysqld) configured with
the following configure options:
| Option | Comment |
| --with-server-suffix=-max | Add a suffix to the mysqld version string.
|
| --with-bdb | Support for Berkeley DB (BDB) tables |
| --with-innodb | Support for InnoDB tables. |
| CFLAGS=-DUSE_SYMDIR | Symbolic links support for Windows. |
You can find the MySQL-max binaries at http://www.mysql.com/downloads/mysql-max-3.23.html.
The Windows MySQL 3.23 binary distribution includes both the
standard mysqld.exe binary and the mysqld-max.exe binary.
http://www.mysql.com/downloads/mysql-3.23.html.
See section 4.13.1 Installing MySQL on Windows.
Note that as Berkeley DB and InnoDB are not available for all platforms,
some of the Max binaries may not have support for both of these.
You can check which table types are supported by doing the following
query:
mysql> show variables like "have_%"; +---------------+-------+ | Variable_name | Value | +---------------+-------+ | have_bdb | YES | | have_gemini | NO | | have_innodb | NO | | have_isam | YES | | have_raid | YES | | have_ssl | NO | +---------------+-------+
The meaning of the values are:
| Value | Meaning. |
| YES | The option is activated and usable. |
| NO | MySQL is not compiled with support for this option. |
| DISABLED | The xxxx option is disabled because one started mysqld with --skip-xxxx or because one didn't start mysqld with all needed options to enable the option. In this case the hostname.err file should contain a reason for why the option is disabled.
|
NOTE: To be able to create InnoDB tables you MUST edit
your startup options to include at least the innodb_data_file_path
option. See section 8.7.2 InnoDB startup options.
To get better performance for BDB tables, you should add some configuration options for these too. See section 8.5.3 BDB startup options.
safe_mysqld will automatically try to start any mysqld binary
with the -max prefix. This makes it very easy to test out a
another mysqld binary in an existing installation. Just
run configure with the options you want and then install the
new mysqld binary as mysqld-max in the same directory
where your old mysqld binary is. See section 15.3 safe_mysqld, the wrapper around mysqld.
The mysqld-max RPM uses the above mentioned safe_mysqld
feature. It just installs the mysqld-max executable and
safe_mysqld will automatically use this executable when
safe_mysqld is restarted.
The following table shows which table types our standard MySQL-Max binaries includes:
| System | BDB | InnoDB |
| AIX 4.3 | N | Y |
| HP-UX 11.0 | N | Y |
| Linux-Alpha | N | Y |
| Linux-Intel | Y | Y |
| Linux-Ia64 | N | Y |
| Solaris-intel | N | Y |
| Solaris-sparc | Y | Y |
| SCO OSR5 | Y | Y |
| UnixWare | Y | Y |
| Windows/NT | Y | Y |
safe_mysqld is the recommended way to start a mysqld
daemon on Unix. safe_mysqld adds some safety features such as
restarting the server when an error occurs and logging run-time
information to a log file.
If you don't use --mysqld=# or --mysqld-version=#
safe_mysqld will use an executable named mysqld-max if it
exists. If not, safe_mysqld will start mysqld.
This makes it very easy to test to use mysqld-max instead of
mysqld; Just copy mysqld-max to where you have
mysqld and it will be used.
Normally one should never edit the safe_mysqld script, but
instead put the options to safe_mysqld in the
[safe_mysqld] section in the my.cnf
file. safe_mysqld will read all options from the [mysqld],
[server] and [safe_mysqld] sections from the option files.
See section 4.16.5 Option Files.
Note that all options on the command line to safe_mysqld are passed
to mysqld. If you wants to use any options in safe_mysqld that
mysqld doesn't support, you must specify these in the option file.
Most of the options to safe_mysqld are the same as the options to
mysqld. See section 4.16.4 mysqld Command-line Options.
safe_mysqld supports the following options:
--basedir=path
--core-file-size=#
mysqld should be able to create. Passed to ulimit -c.
--datadir=path
--defaults-extra-file=path
--defaults-file=path
--err-log=path
--ledir=path
mysqld
--log=path
--mysqld=mysqld-version
mysqld version in the ledir directory you want to start.
--mysqld-version=version
--mysqld= but here you only give the suffix for mysqld.
For example if you use --mysqld-version=max, safe_mysqld will
start the ledir/mysqld-max version. If the argument to
--mysqld-version is empty, ledir/mysqld will be used.
--no-defaults
--open-files-limit=#
mysqld should be able to open. Passed to ulimit -n. Note that you need to start safe_mysqld as root for this to work properly!
--pid-file=path
--port=#
--socket=path
--timezone=#
TZ) variable to the value of this parameter.
--user=#
The safe_mysqld script is written so that it normally is able to start
a server that was installed from either a source or a binary version of
MySQL, even if these install the server in slightly different
locations. safe_mysqld expects one of these conditions to be true:
safe_mysqld is invoked. safe_mysqld looks under its working
directory for `bin' and `data' directories (for binary
distributions) or for `libexec' and `var' directories (for source
distributions). This condition should be met if you execute
safe_mysqld from your MySQL installation directory (for
example, `/usr/local/mysql' for a binary distribution).
safe_mysqld attempts to locate them by absolute pathnames. Typical
locations are `/usr/local/libexec' and `/usr/local/var'.
The actual locations are determined when the distribution was built from which
safe_mysqld comes. They should be correct if
MySQL was installed in a standard location.
Because safe_mysqld will try to find the server and databases relative
to its own working directory, you can install a binary distribution of
MySQL anywhere, as long as you start safe_mysqld from the
MySQL installation directory:
shell> cd mysql_installation_directory shell> bin/safe_mysqld &
If safe_mysqld fails, even when invoked from the MySQL
installation directory, you can modify it to use the path to mysqld
and the pathname options that are correct for your system. Note that if you
upgrade MySQL in the future, your modified version of
safe_mysqld will be overwritten, so you should make a copy of your
edited version that you can reinstall.
mysqld_multi is meant for managing several mysqld
processes running in different UNIX sockets and TCP/IP ports.
The program will search for group(s) named [mysqld#] from my.cnf (or the
given --config-file=...), where # can be any positive number starting
from 1. These groups should be the same as the usual [mysqld]
group (e.g. options to mysqld, see MySQL manual for detailed
information about this group), but with those port, socket etc. options
that are wanted for each separate mysqld processes. The number in
the group name has another function; it can be used for starting,
stopping, or reporting some specific mysqld servers with this
program. See the usage and options below for more information.
Usage: mysqld_multi [OPTIONS] {start|stop|report} [GNR,GNR,GNR...]
or mysqld_multi [OPTIONS] {start|stop|report} [GNR-GNR,GNR,GNR-GNR,...]
The GNR above means the group number. You can start, stop or report any GNR, or several of them at the same time. (See --example) The GNRs list can be comma separated, or a dash combined, of which the latter means that all the GNRs between GNR1-GNR2 will be affected. Without GNR argument all the found groups will be either started, stopped, or reported. Note that you must not have any white spaces in the GNR list. Anything after a white space is ignored.
mysqld_multi supports the following options:
--config-file=...
[mysqld_multi]), but only groups
[mysqld#]. Without this option everything will be searched from the
ordinary my.cnf file.
--example
--help
--log=...
--mysqladmin=...
mysqladmin binary to be used for a server shutdown.
--mysqld=...
mysqld binary to be used. Note that you can give
safe_mysqld to this option also. The options are passed to
mysqld. Just make sure you have mysqld in your environment
variable PATH or fix safe_mysqld.
--no-log
--password=...
mysqladmin.
--tcp-ip
--user=...
mysqladmin.
--version
Some notes about mysqld_multi:
mysqld services (e.g using the mysqladmin) have the same
password and username for all the data directories accessed (to the
'mysql' database) And make sure that the user has the 'Shutdown_priv'
privilege! If you have many data- directories and many different 'mysql'
databases with different passwords for the MySQL 'root' user,
you may want to create a common 'multi_admin' user for each using the
same password (see below). Example how to do it:
shell> mysql -u root -S /tmp/mysql.sock -proot_password -e "GRANT SHUTDOWN ON *.* TO multi_admin@localhost IDENTIFIED BY 'multipass'" See section 6.9 How the Privilege System Works.You will have to do the above for each
mysqld running in each
data directory, that you have (just change the socket, -S=...)
pid-file is very important, if you are using safe_mysqld
to start mysqld (e.g. --mysqld=safe_mysqld) Every mysqld
should have its own pid-file. The advantage using
safe_mysqld instead of mysqld directly here is, that
safe_mysqld 'guards' every mysqld process and will restart
it, if a mysqld process fails due to signal kill -9, or
similar. (Like segmentation fault, which MySQL should never do,
of course ;) Please note that safe_mysqld script may require that
you start it from a certain place. This means that you may have to CD to
a certain directory, before you start the mysqld_multi. If
you have problems starting, please see the safe_mysqld
script. Check especially the lines:
-------------------------------------------------------------------------- MY_PWD=`pwd` Check if we are starting this relative (for the binary release) if test -d /data/mysql -a -f ./share/mysql/english/errmsg.sys -a -x ./bin/mysqld -------------------------------------------------------------------------- See section 15.3 safe_mysqld, the wrapper around mysqld.The above test should be successful, or you may encounter problems.
mysqlds in the same data
directory. Use separate data directories, unless you KNOW what
you are doing!
mysqld.
mysqld group were intentionally left out from
the example. You may have 'gaps' in the config file. This gives you
more flexibility. The order in which the mysqlds are started or
stopped depends on the order in which they appear in the config file.
mysqld, but in order to
do this you need to be root when you start the mysqld_multi
script. Having the option in the config file doesn't matter; you will
just get a warning, if you are not the superuser and the mysqlds
are started under YOUR UNIX account. IMPORTANT: Make
sure that the pid-file and the data directory are
read+write(+execute for the latter one) accessible for THAT
UNIX user, who the specific mysqld process is started
as. DON'T use the UNIX root account for this, unless you
KNOW what you are doing!
mysqlds and why WOULD
YOU WANT to have separate mysqld processes. Starting multiple
mysqlds in one data directory WILL NOT give you extra
performance in a threaded system!
See section 22.3 Running Multiple MySQL Servers on the Same Machine.
This is an example of the config file on behalf of mysqld_multi.
# This file should probably be in your home dir (~/.my.cnf) or /etc/my.cnf # Version 2.1 by Jani Tolonen [mysqld_multi] mysqld = /usr/local/bin/safe_mysqld mysqladmin = /usr/local/bin/mysqladmin user = multi_admin password = multipass [mysqld2] socket = /tmp/mysql.sock2 port = 3307 pid-file = /usr/local/mysql/var2/hostname.pid2 datadir = /usr/local/mysql/var2 language = /usr/local/share/mysql/english user = john [mysqld3] socket = /tmp/mysql.sock3 port = 3308 pid-file = /usr/local/mysql/var3/hostname.pid3 datadir = /usr/local/mysql/var3 language = /usr/local/share/mysql/swedish user = monty [mysqld4] socket = /tmp/mysql.sock4 port = 3309 pid-file = /usr/local/mysql/var4/hostname.pid4 datadir = /usr/local/mysql/var4 language = /usr/local/share/mysql/estonia user = tonu [mysqld6] socket = /tmp/mysql.sock6 port = 3311 pid-file = /usr/local/mysql/var6/hostname.pid6 datadir = /usr/local/mysql/var6 language = /usr/local/share/mysql/japanese user = jani
See section 4.16.5 Option Files.
mysql is a simple SQL shell (with GNU readline capabilities).
It supports interactive and non-interactive use. When used interactively,
query results are presented in an ASCII-table format. When used
non-interactively (for example, as a filter), the result is presented in
tab-separated format. (The output format can be changed using command-line
options.) You can run scripts simply like this:
shell> mysql database < script.sql > output.tab
If you have problems due to insufficient memory in the client, use the
--quick option! This forces mysql to use
mysql_use_result() rather than mysql_store_result() to
retrieve the result set.
Using mysql is very easy. Just start it as follows:
mysql database or mysql --user=user_name --password=your_password database. Type a SQL statement, end it with `;', `\g', or `\G'
and press RETURN/ENTER.
mysql supports the following options:
-?, --help
-A, --no-auto-rehash
-B, --batch
--character-sets-dir=...
-C, --compress
-#, --debug[=...]
-D, --database=...
my.cnf file.
--default-character-set=...
-e, --execute=...
-E, --vertical
\G.
-f, --force
-g, --no-named-commands
-G, --enable-named-commands
-i, --ignore-space
-h, --host=...
-H, --html
-L, --skip-line-numbers
--no-pager
--no-tee
-n, --unbuffered
-N, --skip-column-names
-O, --set-variable var=option
--help lists variables.
-o, --one-database
--pager[=...]ENV variable PAGER. Valid
pagers are less, more, cat [> filename], etc. See interactive help (\h)
also. This option does not work in batch mode. Pager works only in UNIX.
-p[password], --password[=...]
-p you can't have a space between the option and the
password.
-P --port=...
-q, --quick
-r, --raw
--batch
-s, --silent
-S --socket=...
-t --table
-T, --debug-info
--tee=...
-u, --user=#
-U, --safe-updates[=#], --i-am-a-dummy[=#]
UPDATE and DELETE that uses keys. See below for
more information about this option. You can reset this option if you have
it in your my.cnf file by using --safe-updates=0.
-v, --verbose
-V, --version
-w, --wait
You can also set the following variables with -O or
--set-variable:
| Variablename | Default | Description |
| connect_timeout | 0 | Number of seconds before timeout connection. |
| max_allowed_packet | 16777216 | Max packetlength to send/receive from to server |
| net_buffer_length | 16384 | Buffer for TCP/IP and socket communication |
| select_limit | 1000 | Automatic limit for SELECT when using --i-am-a-dummy |
| max_join_size | 1000000 | Automatic limit for rows in a join when using --i-am-a-dummy. |
If you type 'help' on the command line, mysql will print out the
commands that it supports:
mysql> help MySQL commands: help (\h) Display this text. ? (\h) Synonym for `help'. clear (\c) Clear command. connect (\r) Reconnect to the server. Optional arguments are db and host. edit (\e) Edit command with $EDITOR. ego (\G) Send command to mysql server, display result vertically. exit (\q) Exit mysql. Same as quit. go (\g) Send command to mysql server. nopager (\n) Disable pager, print to stdout. notee (\t) Don't write into outfile. pager (\P) Set PAGER [to_pager]. Print the query results via PAGER. print (\p) Print current command. quit (\q) Quit mysql. rehash (\#) Rebuild completion hash. source (\.) Execute a SQL script file. Takes a file name as an argument. status (\s) Get status information from the server. tee (\T) Set outfile [to_outfile]. Append everything into given outfile. use (\u) Use another database. Takes database name as argument.
From the above, pager only works in UNIX.
The status command gives you some information about the
connection and the server you are using. If you are running in the
--safe-updates mode, status will also print the values for
the mysql variables that affect your queries.
A useful startup option for beginners (introduced in MySQL
Version 3.23.11) is --safe-updates (or --i-am-a-dummy for
users that has at some time done a DELETE FROM table_name but
forgot the WHERE clause). When using this option, mysql
sends the following command to the MySQL server when opening
the connection:
SET SQL_SAFE_UPDATES=1,SQL_SELECT_LIMIT=#select_limit#,
SQL_MAX_JOIN_SIZE=#max_join_size#"
where #select_limit# and #max_join_size# are variables that
can be set from the mysql command line. See section 7.33 SET Syntax.
The effect of the above is:
UPDATE or DELETE statement
if you don't have a key constraint in the WHERE part. One can,
however, force an UPDATE/DELETE by using LIMIT:
UPDATE table_name SET not_key_column=# WHERE not_key_column=# LIMIT 1;
#select_limit# rows.
SELECT's that will probably need to examine more than
#max_join_size row combinations will be aborted.
Some useful hints about the mysql client:
Some data is much more readable when displayed vertically, instead of the usual horizontal box type output. For example longer text, which includes new lines, is often much easier to be read with vertical output.
mysql> select * from mails where length(txt) < 300 limit 300,1\G
*************************** 1. row ***************************
msg_nro: 3068
date: 2000-03-01 23:29:50
time_zone: +0200
mail_from: Monty
reply: monty@no.spam.com
mail_to: "Thimble Smith" <tim@no.spam.com>
sbj: UTF-8
txt: >>>>> "Thimble" == Thimble Smith writes:
Thimble> Hi. I think this is a good idea. Is anyone familiar with UTF-8
Thimble> or Unicode? Otherwise I'll put this on my TODO list and see what
Thimble> happens.
Yes, please do that.
Regards,
Monty
file: inbox-jani-1
hash: 190402944
1 row in set (0.09 sec)
tee option. The tee can be
started with option --tee=..., or from the command line
interactively with command tee. All the data displayed on the
screen will also be appended into a given file. This can be very useful
for debugging purposes also. The tee can be disabled from the
command line with command notee. Executing tee again
starts logging again. Without a parameter the previous file will be
used. Note that tee will flush the results into the file after
each command, just before the command line appears again waiting for the
next command.
--pager[=...]. Without argument, mysql client will look
for environment variable PAGER and set pager to that.
pager can be started from the interactive command line with
command pager and disabled with command nopager. The
command takes an argument optionally and the pager will be set to
that. Command pager can be called without an argument, but this
requires that the option --pager was used, or the pager
will default to stdout. pager works only in UNIX, since it uses
the popen() function, which doesn't exist in Windows. In Windows, the
tee option can be used instead, although it may not be as handy
as pager can be in some situations.
pager: You can use it to write to a file:
mysql> pager cat > /tmp/log.txtand the results will only go to a file. You can also pass any options for the programs that you want to use with the
pager:
mysql> pager less -n -i -SFrom the above do note the option '-S'. You may find it very useful when browsing the results; try the option with horizontal output (end commands with '\g', or ';') and with vertical output (end commands with '\G'). Sometimes a very wide result set is hard to be read from the screen, with option -S to less you can browse the results within the interactive less from left to right, preventing lines longer than your screen from being continued to the next line. This can make the result set much more readable. You can swith the mode between on and off within the interactive less with '-S'. See the 'h' for more help about less.
mysql> pager cat | tee /dr1/tmp/res.txt | tee /dr2/tmp/res2.txt | less -n -i -S
tee
enabled, pager set to 'less' and you will be able to browse the
results in unix 'less' and still have everything appended into a file
the same time. The difference between UNIX tee used with the
pager and the mysql client in-built tee, is that
the in-built tee works even if you don't have the UNIX tee
available. The in-built tee also logs everything that is printed
on the screen, where the UNIX tee used with pager doesn't
log quite that much. Last, but not least, the interactive tee is
more handy to switch on and off, when you want to log something into a
file, but want to be able to turn the feature off sometimes.
A utility for performing administrative operations. The syntax is:
shell> mysqladmin [OPTIONS] command [command-option] command ...
You can get a list of the options your version of mysqladmin supports
by executing mysqladmin --help.
The current mysqladmin supports the following commands:
| create databasename | Create a new database. |
| drop databasename | Delete a database and all its tables. |
| extended-status | Gives an extended status message from the server. |
| flush-hosts | Flush all cached hosts. |
| flush-logs | Flush all logs. |
| flush-tables | Flush all tables. |
| flush-privileges | Reload grant tables (same as reload). |
| kill id,id,... | Kill mysql threads. |
| password | New-password. Change old password to new-password. |
| ping | Check if mysqld is alive.
|
| processlist | Show list of active threads in server. |
| reload | Reload grant tables. |
| refresh | Flush all tables and close and open logfiles. |
| shutdown | Take server down. |
| slave-start | Start slave replication thread. |
| slave-stop | Stop slave replication thread. |
| status | Gives a short status message from the server. |
| variables | Prints variables available. |
| version | Get version info from server. |
All commands can be shortened to their unique prefix. For example:
shell> mysqladmin proc stat +----+-------+-----------+----+-------------+------+-------+------+ | Id | User | Host | db | Command | Time | State | Info | +----+-------+-----------+----+-------------+------+-------+------+ | 6 | monty | localhost | | Processlist | 0 | | | +----+-------+-----------+----+-------------+------+-------+------+ Uptime: 10077 Threads: 1 Questions: 9 Slow queries: 0 Opens: 6 Flush tables: 1 Open tables: 2 Memory in use: 1092K Max memory used: 1116K
The mysqladmin status command result has the following columns:
| Uptime | Number of seconds the MySQL server has been up. |
| Threads | Number of active threads (clients). |
| Questions | Number of questions from clients since mysqld was started.
|
| Slow queries | Queries that have taken more than long_query_time seconds. See section 23.5 The Slow Query Log.
|
| Opens | How many tables mysqld has opened.
|
| Flush tables | Number of flush ..., refresh, and reload commands.
|
| Open tables | Number of tables that are open now. |
| Memory in use | Memory allocated directly by the mysqld code (only available when MySQL is compiled with --with-debug=full).
|
| Max memory used | Maximum memory allocated directly by the mysqld code (only available when MySQL is compiled with --with-debug=full).
|
If you do myslqadmin shutdown on a socket (in other words, on a
the computer where mysqld is running), mysqladmin will
wait until the MySQL pid-file is removed to ensure that
the mysqld server has stopped properly.
Utility to dump a database or a collection of database for backup or for transferring the data to another SQL server (not necessarily a MySQL server). The dump will contain SQL statements to create the table and/or populate the table.
If you are doing a backup on the server, you should consider using
the mysqlhotcopy instead. See section 15.8 Copying MySQL Databases and Tables.
shell> mysqldump [OPTIONS] database [tables] OR mysqldump [OPTIONS] --databases [OPTIONS] DB1 [DB2 DB3...] OR mysqldump [OPTIONS] --all-databases [OPTIONS]
If you don't give any tables or use the --databases or
--all-databases, the whole database(s) will be dumped.
You can get a list of the options your version of mysqldump supports
by executing mysqldump --help.
Note that if you run mysqldump without --quick or
--opt, mysqldump will load the whole result set into
memory before dumping the result. This will probably be a problem if
you are dumping a big database.
Note that if you are using a new copy of the mysqldump program
and you are going to do a dump that will be read into a very old MySQL
server, you should not use the --opt or -e options.
mysqldump supports the following options:
--add-locks
LOCK TABLES before and UNLOCK TABLE after each table dump.
(To get faster inserts into MySQL.)
--add-drop-table
drop table before each create statement.
-A, --all-databases
--databases with all
databases selected.
-a, --all
--allow-keywords
-c, --complete-insert
-C, --compress
-B, --databases
USE db_name; will be included in the output before each new database.
--delayed
INSERT DELAYED command.
-e, --extended-insert
INSERT syntax. (Gives more compact and
faster inserts statements.)
-#, --debug[=option_string]
--help
--fields-terminated-by=...
--fields-enclosed-by=...
--fields-optionally-enclosed-by=...
--fields-escaped-by=...
--lines-terminated-by=...
-T option and have the same
meaning as the corresponding clauses for LOAD DATA INFILE.
See section 7.23 LOAD DATA INFILE Syntax.
-F, --flush-logs
-f, --force,
-h, --host=..
localhost.
-l, --lock-tables.
READ LOCAL to allow concurrent inserts in the case of MyISAM
tables.
-n, --no-create-db
-t, --no-create-info
CREATE TABLE statement.)
-d, --no-data
--opt
--quick --add-drop-table --add-locks --extended-insert
--lock-tables. Should give you the fastest possible dump for reading
into a MySQL server.
-pyour_pass, --password[=your_pass]
mysqldump you will be prompted for a password.
-P port_num, --port=port_num
localhost, for which Unix sockets are
used.)
-q, --quick
mysql_use_result()
to do this.
-r, --result-file=...
-S /path/to/socket, --socket=/path/to/socket
localhost (which is the
default host).
--tables
-T, --tab=path-to-some-directory
table_name.sql file, that contains the SQL CREATE commands,
and a table_name.txt file, that contains the data, for each give table.
NOTE: This only works if mysqldump is run on the same
machine as the mysqld daemon. The format of the .txt file
is made according to the --fields-xxx and --lines--xxx options.
-u user_name, --user=user_name
-O var=option, --set-variable var=option
-v, --verbose
-V, --version
-w, --where='where-condition'
"--where=user='jimf'" "-wuserid>1" "-wuserid<1"
-O net_buffer_length=#, where # < 16M
--extended-insert or --opt), mysqldump will create
rows up to net_buffer_length length. If you increase this
variable, you should also ensure that the max_allowed_packet
variable in the MySQL server is bigger than the
net_buffer_length.
The most normal use of mysqldump is probably for making a backup of
whole databases. See section 22.2 Database Backups.
mysqldump --opt database > backup-file.sql
You can read this back into MySQL with:
mysql database < backup-file.sql
or
mysql -e "source /patch-to-backup/backup-file.sql" database
However, it's also very useful to populate another MySQL server with information from a database:
mysqldump --opt database | mysql --host=remote-host -C database
It is possible to dump several databases with one command:
mysqldump --databases database1 [database2 database3...] > my_databases.sql
If all the databases are wanted, one can use:
mysqldump --all-databases > all_databases.sql
mysqlhotcopy is a perl script that uses LOCK TABLES,
FLUSH TABLES and cp or scp to quickly make a backup
of a database. It's the fastest way to make a backup of the database,
of single tables but it can only be run on the same machine where the
database directories are.
mysqlhotcopy db_name [/path/to/new_directory] mysqlhotcopy db_name_1 ... db_name_n /path/to/new_directory mysqlhotcopy db_name./regex/
mysqlhotcopy supports the following options:
-?, --help
-u, --user=#
-p, --password=#
-P, --port=#
-S, --socket=#
--allowold
--keepold
--noindices
myisamchk -rq..
--method=#
cp or scp).
-q, --quiet
--debug
-n, --dryrun
--regexp=#
--suffix=#
--checkpoint=#
--flushlog
--tmpdir=#
You can use perldoc mysqlhotcopy to get a more complete
documentation for mysqlhotcopy.
mysqlhotcopy reads the groups [client] and [mysqlhotcopy]
from the option files.
To be able to execute mysqlhotcopy you need write access to the
backup directory, SELECT privilege to the tables you are about to
copy and the MySQL Reload privilege (to be able to
execute FLUSH TABLES).
mysqlimport provides a command-line interface to the LOAD DATA
INFILE SQL statement. Most options to mysqlimport correspond
directly to the same options to LOAD DATA INFILE.
See section 7.23 LOAD DATA INFILE Syntax.
mysqlimport is invoked like this:
shell> mysqlimport [options] database textfile1 [textfile2....]
For each text file named on the command line,
mysqlimport strips any extension from the filename and uses the result
to determine which table to import the file's contents into. For example,
files named `patient.txt', `patient.text', and `patient' would
all be imported into a table named patient.
mysqlimport supports the following options:
-c, --columns=...
LOAD DATA INFILE command,
which is then passed to MySQL. See section 7.23 LOAD DATA INFILE Syntax.
-C, --compress
-#, --debug[=option_string]
-d, --delete
--fields-terminated-by=...
--fields-enclosed-by=...
--fields-optionally-enclosed-by=...
--fields-escaped-by=...
--lines-terminated-by=...
LOAD DATA INFILE. See section 7.23 LOAD DATA INFILE Syntax.
-f, --force
--force,
mysqlimport exits if a table doesn't exist.
--help
-h host_name, --host=host_name
localhost.
-i, --ignore
--replace option.
-l, --lock-tables
-L, --local
localhost (which is the default host).
-pyour_pass, --password[=your_pass]
mysqlimport you will be prompted for a password.
-P port_num, --port=port_num
localhost, for which Unix sockets are
used.)
-r, --replace
--replace and --ignore options control handling of input
records that duplicate existing records on unique key values. If you specify
--replace, new rows replace existing rows that have the same unique key
value. If you specify --ignore, input rows that duplicate an existing
row on a unique key value are skipped. If you don't specify either option, an
error occurs when a duplicate key value is found, and the rest of the text
file is ignored.
-s, --silent
-S /path/to/socket, --socket=/path/to/socket
localhost (which is the
default host).
-u user_name, --user=user_name
-v, --verbose
-V, --version
Here is a sample run using mysqlimport:
$ mysql --version mysql Ver 9.33 Distrib 3.22.25, for pc-linux-gnu (i686) $ uname -a Linux xxx.com 2.2.5-15 #1 Mon Apr 19 22:21:09 EDT 1999 i586 unknown $ mysql -e 'CREATE TABLE imptest(id INT, n VARCHAR(30))' test $ ed a 100 Max Sydow 101 Count Dracula . w imptest.txt 32 q $ od -c imptest.txt 0000000 1 0 0 \t M a x S y d o w \n 1 0 0000020 1 \t C o u n t D r a c u l a \n 0000040 $ mysqlimport --local test imptest.txt test.imptest: Records: 2 Deleted: 0 Skipped: 0 Warnings: 0 $ mysql -e 'SELECT * FROM imptest' test +------+---------------+ | id | n | +------+---------------+ | 100 | Max Sydow | | 101 | Count Dracula | +------+---------------+
perror can be used to print error message(s). perror can
be invoked like this:
shell> perror [OPTIONS] [ERRORCODE [ERRORCODE...]] For example: shell> perror 64 79 Error code 64: Machine is not on the network Error code 79: Can not access a needed shared library
perror can be used to display a description for a system error
code, or an MyISAM/ISAM table handler error code. The error messages
are mostly system dependent.
mysqlshow can be used to quickly look at which databases exist,
their tables, and the table's columns.
With the mysql program you can get the same information with the
SHOW commands. See section 7.28 SHOW Syntax.
mysqlshow is invoked like this:
shell> mysqlshow [OPTIONS] [database [table [column]]]
Note that in newer MySQL versions, you only see those database/tables/columns for which you have some privileges.
If the last argument contains a shell or SQL wild-card (*, ?,
% or _) then only what's matched by the wild card is shown.
This may cause some confusion when you try to display the columns for a
table with a _ as in this case mysqlshow only shows you
the table names that match the pattern. This is easily fixed by
adding an extra % last on the command line (as a separate
argument).
myisampack is used to compress MyISAM tables, and pack_isam
is used to compress ISAM tables. Because ISAM tables are deprecated, we
will only discuss myisampack here, but everything said about
myisampack should also be true for pack_isam.
myisampack works by compressing each column in the table separately.
The information needed to decompress columns is read into memory when the
table is opened. This results in much better performance when accessing
individual records, because you only have to uncompress exactly one record, not
a much larger disk block as when using Stacker on MS-DOS.
Usually, myisampack packs the data file 40%-70%.
MySQL uses memory mapping (mmap()) on compressed tables and
falls back to normal read/write file usage if mmap() doesn't work.
There are currently two limitations with myisampack:
myisampack can also pack BLOB or TEXT columns. The
older pack_isam could not do this.
Fixing these limitations is on our TODO list but with low priority.
myisampack is invoked like this:
shell> myisampack [options] filename ...
Each filename should be the name of an index (`.MYI') file. If you are not in the database directory, you should specify the pathname to the file. It is permissible to omit the `.MYI' extension.
myisampack supports the following options:
-b, --backup
tbl_name.OLD.
-#, --debug=debug_options
debug_options string often is
'd:t:o,filename'.
-f, --force
myisampack creates a temporary file named `tbl_name.TMD'
while it compresses the table. If you kill myisampack, the `.TMD'
file may not be deleted. Normally, myisampack exits with an error if
it finds that `tbl_name.TMD' exists. With --force,
myisampack packs the table anyway.
-?, --help
-j big_tbl_name, --join=big_tbl_name
big_tbl_name. All tables that are to be combined
MUST be identical (same column names and types, same indexes, etc.).
-p #, --packlength=#
myisampack stores all rows with length pointers of 1, 2, or 3
bytes. In most normal cases, myisampack can determine the right length
value before it begins packing the file, but it may notice during the packing
process that it could have used a shorter length. In this case,
myisampack will print a note that the next time you pack the same file,
you could use a shorter record length.)
-s, --silent
-t, --test
-T dir_name, --tmp_dir=dir_name
-v, --verbose
-V, --version
-w, --wait
mysqld server was
invoked with the --skip-locking option, it is not a good idea to
invoke myisampack if the table might be updated during the
packing process.
The sequence of commands shown below illustrates a typical table compression session:
shell> ls -l station.* -rw-rw-r-- 1 monty my 994128 Apr 17 19:00 station.MYD -rw-rw-r-- 1 monty my 53248 Apr 17 19:00 station.MYI -rw-rw-r-- 1 monty my 5767 Apr 17 19:00 station.frm shell> myisamchk -dvv station MyISAM file: station Isam-version: 2 Creation time: 1996-03-13 10:08:58 Recover time: 1997-02-02 3:06:43 Data records: 1192 Deleted blocks: 0 Datafile: Parts: 1192 Deleted data: 0 Datafile pointer (bytes): 2 Keyfile pointer (bytes): 2 Max datafile length: 54657023 Max keyfile length: 33554431 Recordlength: 834 Record format: Fixed length table description: Key Start Len Index Type Root Blocksize Rec/key 1 2 4 unique unsigned long 1024 1024 1 2 32 30 multip. text 10240 1024 1 Field Start Length Type 1 1 1 2 2 4 3 6 4 4 10 1 5 11 20 6 31 1 7 32 30 8 62 35 9 97 35 10 132 35 11 167 4 12 171 16 13 187 35 14 222 4 15 226 16 16 242 20 17 262 20 18 282 20 19 302 30 20 332 4 21 336 4 22 340 1 23 341 8 24 349 8 25 357 8 26 365 2 27 367 2 28 369 4 29 373 4 30 377 1 31 378 2 32 380 8 33 388 4 34 392 4 35 396 4 36 400 4 37 404 1 38 405 4 39 409 4 40 413 4 41 417 4 42 421 4 43 425 4 44 429 20 45 449 30 46 479 1 47 480 1 48 481 79 49 560 79 50 639 79 51 718 79 52 797 8 53 805 1 54 806 1 55 807 20 56 827 4 57 831 4 shell> myisampack station.MYI Compressing station.MYI: (1192 records) - Calculating statistics normal: 20 empty-space: 16 empty-zero: 12 empty-fill: 11 pre-space: 0 end-space: 12 table-lookups: 5 zero: 7 Original trees: 57 After join: 17 - Compressing file 87.14% shell> ls -l station.* -rw-rw-r-- 1 monty my 127874 Apr 17 19:00 station.MYD -rw-rw-r-- 1 monty my 55296 Apr 17 19:04 station.MYI -rw-rw-r-- 1 monty my 5767 Apr 17 19:00 station.frm shell> myisamchk -dvv station MyISAM file: station Isam-version: 2 Creation time: 1996-03-13 10:08:58 Recover time: 1997-04-17 19:04:26 Data records: 1192 Deleted blocks: 0 Datafile: Parts: 1192 Deleted data: 0 Datafilepointer (bytes): 3 Keyfile pointer (bytes): 1 Max datafile length: 16777215 Max keyfile length: 131071 Recordlength: 834 Record format: Compressed table description: Key Start Len Index Type Root Blocksize Rec/key 1 2 4 unique unsigned long 10240 1024 1 2 32 30 multip. text 54272 1024 1 Field Start Length Type Huff tree Bits 1 1 1 constant 1 0 2 2 4 zerofill(1) 2 9 3 6 4 no zeros, zerofill(1) 2 9 4 10 1 3 9 5 11 20 table-lookup 4 0 6 31 1 3 9 7 32 30 no endspace, not_always 5 9 8 62 35 no endspace, not_always, no empty 6 9 9 97 35 no empty 7 9 10 132 35 no endspace, not_always, no empty 6 9 11 167 4 zerofill(1) 2 9 12 171 16 no endspace, not_always, no empty 5 9 13 187 35 no endspace, not_always, no empty 6 9 14 222 4 zerofill(1) 2 9 15 226 16 no endspace, not_always, no empty 5 9 16 242 20 no endspace, not_always 8 9 17 262 20 no endspace, no empty 8 9 18 282 20 no endspace, no empty 5 9 19 302 30 no endspace, no empty 6 9 20 332 4 always zero 2 9 21 336 4 always zero 2 9 22 340 1 3 9 23 341 8 table-lookup 9 0 24 349 8 table-lookup 10 0 25 357 8 always zero 2 9 26 365 2 2 9 27 367 2 no zeros, zerofill(1) 2 9 28 369 4 no zeros, zerofill(1) 2 9 29 373 4 table-lookup 11 0 30 377 1 3 9 31 378 2 no zeros, zerofill(1) 2 9 32 380 8 no zeros 2 9 33 388 4 always zero 2 9 34 392 4 table-lookup 12 0 35 396 4 no zeros, zerofill(1) 13 9 36 400 4 no zeros, zerofill(1) 2 9 37 404 1 2 9 38 405 4 no zeros 2 9 39 409 4 always zero 2 9 40 413 4 no zeros 2 9 41 417 4 always zero 2 9 42 421 4 no zeros 2 9 43 425 4 always zero 2 9 44 429 20 no empty 3 9 45 449 30 no empty 3 9 46 479 1 14 4 47 480 1 14 4 48 481 79 no endspace, no empty 15 9 49 560 79 no empty 2 9 50 639 79 no empty 2 9 51 718 79 no endspace 16 9 52 797 8 no empty 2 9 53 805 1 17 1 54 806 1 3 9 55 807 20 no empty 3 9 56 827 4 no zeros, zerofill(2) 2 9 57 831 4 no zeros, zerofill(1) 2 9
The information printed by myisampack is described below:
normal
empty-space
empty-zero
empty-fill
INTEGER
column may be changed to MEDIUMINT).
pre-space
end-space
table-lookup
ENUM before Huffman compression.
zero
Original trees
After join
After a table has been compressed, myisamchk -dvv prints additional
information about each field:
Type
constant
no endspace
no endspace, not_always
no endspace, no empty
table-lookup
ENUM.
zerofill(n)
n bytes in the value are always 0 and are not
stored.
no zeros
always zero
Huff tree
Bits
After you have run pack_isam/myisampack you must run
isamchk/myisamchk to re-create the index. At this time you
can also sort the index blocks and create statistics needed for
the MySQL optimizer to work more efficiently:
myisamchk -rq --analyze --sort-index table_name.MYI isamchk -rq --analyze --sort-index table_name.ISM
After you have installed the packed table into the MySQL database
directory you should do mysqladmin flush-tables to force mysqld
to start using the new table.
Go to the first, previous, next, last section, table of contents.